Hi Guys and Gals !

As you know NetObject Fusion is one of the Web Creation software tools many people use and like. It allows you to build great looking web sites really within matter of hours in many cases. Thing is this babe costs almost 200$…

And we are into money saving…right ?

So here is what you do to save 90$ of this software:

If you go to http://www.netobjectfusion.com/ you’ll see it says “Buy Fusion 10 FULL $200″ or so.

And then it says “Upgrade $100″ or so.

Thing is if you search for the upgrade options it seems to mention version 8 and 9 as the possible products to upgrade from.

Well, we like free - right ? And legal as well of course.

So we download the free limited version at:

http://www.netobjects.com/html/essentials.html

Go ahead and install the software (which may suffice you for many simple cases) .

Then as you run it you should see it says on the top of its online page you can upgrade to the latest

Fusion version paying about $100 or a bit more.

Go ahead and do that if you want the software.

I tried it and it works for v10.0 and I guess for newer versions as well.

It appears that NetFusion Essentials actually is identified as “v7.5″ and as I tried it this is upgradable to v10

or newer - as tried on my PC.

Of course that as you purchase and before paying read through the instructions and make sure all is OK.

And you can always submit a question to NetFusion and verify this option if you want to be 100% sure this still works.

Now, how much time did it take you reading this post?

I bet not much more than 2 minutes…as promissed.

That’s it for now guys !

Your Best IT Friend.

If you enjoyed this post, make sure you subscribe to my RSS feed!